epochryphon/OrcaSlicer-bambulab
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

clone successful

Browse Source
This commit is contained in:
epochryphon
2026-05-16 09:00:22 -05:00
commit bcb6fac8a1
16931 changed files with 4070456 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

192
resources/profiles/Flashforge/filament/Flashforge Generic PETG-CF10.json Normal file
View File

@@ -0,0 +1,192 @@
{
"type": "filament",
"name": "Flashforge Generic PETG-CF10",
"inherits": "fdm_filament_pet",
"from": "system",
"setting_id": "GFSA04",
"filament_id": "GFG99",
"instantiation": "true",
"additional_cooling_fan_speed": [
"100"
],
"bed_temperature_difference": [
"10"
],
"chamber_temperature": "0",
"close_fan_the_first_x_layers": [
"1"
],
"compatible_printers": [
"Flashforge Adventurer 5M 0.4 Nozzle",
"Flashforge Adventurer 5M 0.6 Nozzle",
"Flashforge Adventurer 5M 0.8 Nozzle",
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
"Flashforge Adventurer 5M Pro 0.8 Nozzle"
],
"compatible_printers_condition": "",
"compatible_prints": [],
"compatible_prints_condition": "",
"cool_plate_temp": [
"60"
],
"cool_plate_temp_initial_layer": [
"60"
],
"default_filament_colour": [
""
],
"enable_overhang_bridge_fan": [
"1"
],
"enable_pressure_advance": [
"1"
],
"eng_plate_temp": [
"60"
],
"eng_plate_temp_initial_layer": [
"60"
],
"fan_cooling_layer_time": [
"30"
],
"fan_max_speed": [
"100"
],
"fan_min_speed": [
"80"
],
"filament_cost": [
"30"
],
"filament_density": [
"1.27"
],
"filament_deretraction_speed": [
"nil"
],
"filament_diameter": [
"1.75"
],
"filament_end_gcode": [
"; filament end gcode \n"
],
"filament_flow_ratio": [
"1"
],
"filament_is_support": [
"0"
],
"filament_max_volumetric_speed": [
"12"
],
"filament_minimal_purge_on_wipe_tower": [
"15"
],
"filament_retract_before_wipe": [
"nil"
],
"filament_retract_restart_extra": [
"nil"
],
"filament_retract_when_changing_layer": [
"nil"
],
"filament_retraction_length": [
"nil"
],
"filament_retraction_minimum_travel": [
"nil"
],
"filament_retraction_speed": [
"nil"
],
"filament_settings_id": [
"Flashforge PETG-CF10"
],
"filament_shrink": [
"100%"
],
"filament_soluble": [
"0"
],
"filament_start_gcode": [
"; filament start gcode\n;right_extruder_material:PETG-CF10\n"
],
"filament_type": [
"PETG-CF"
],
"filament_vendor": [
"Generic"
],
"filament_wipe": [
"nil"
],
"filament_wipe_distance": [
"nil"
],
"filament_z_hop": [
"nil"
],
"filament_z_hop_types": [
"nil"
],
"full_fan_speed_layer": [
"0"
],
"hot_plate_temp": [
"70"
],
"hot_plate_temp_initial_layer": [
"70"
],
"nozzle_temperature": [
"245"
],
"nozzle_temperature_initial_layer": [
"245"
],
"nozzle_temperature_range_high": [
"260"
],
"nozzle_temperature_range_low": [
"220"
],
"overhang_fan_speed": [
"90"
],
"overhang_fan_threshold": [
"25%"
],
"pressure_advance": [
"0.035"
],
"reduce_fan_stop_start_freq": [
"1"
],
"required_nozzle_HRC": [
"0"
],
"slow_down_for_layer_cooling": [
"1"
],
"slow_down_layer_time": [
"8"
],
"slow_down_min_speed": [
"20"
],
"support_material_interface_fan_speed": [
"100"
],
"temperature_vitrification": [
"70"
],
"textured_plate_temp": [
"60"
],
"textured_plate_temp_initial_layer": [
"60"
]
}